Printable Page |
 |
 HSP121A
120VAC—NEMA 4X
The HSP-121A is a UL 1449 Listed,
three-stage power line protector. Features include noise filtering,
NEMA-4X enclosure, common mode and normal mode protection. In addition,
the HSP-121A can be installed using conduit fittings and can be
mounted inside or outside of electronic enclosures.
The HSP-121A offers a replaceable
fuse designed to remove the load (protected equipment) from the
line if the unit is either overloaded or the internal protection
fails. This feature prevents surges from entering equipment through
a failed protector, not noticed by the user.
| FEATURES |
| • Three-Stage
Series Hybrid |
| • Polycarbonate
NEMA Enclosure |
| • 1/2"
or 3/4" Punchouts for nipple conduit connectors |
| • UL
1449 Listed |
| • Replaceable
Fuse |
| • Failure
Indicator Light |
| • Terminal
Screw Connections |
|
|
|
| SPECIFICATIONS |
| Clamping Cat |
330V L-N,
400V L-G
ANSI/IEEE C62.41 1991-Cat. Cl/B3 |
| Peak
Clamp Voltage |
315V
L-N, 350V L-G |
| Max Single
Pulse |
10kA |
| Response Time |
<5
nanoseconds |
| Operational Temperature |
20°C
to +85°C |
| Failure Indication
|
LED |
| Operational Voltage |
120 VAC,
60Hz |
| Operational Current
|
15
Amps Service |
| Dimensions |
2.95"
x 4.95" x 3.00" |
|
| INSTALLATION |
- Mount HSP-121A inside
of an electronic rack/enclosure or outside via closed-nipple
or conduit connections.
- Make sure wiring from power sources properly connects
to line side of HSP.
Wiring from protected equipment must properly connect
to EQUIP side of HSP.
- Indication of internal failure:
a. Indicator will extinguish.
b. Fuse blown will disconnect
load from power source.
- Connect only to 120 VAC, 15 Amp max, single-phase,
three-wire circuit (L, N, G)
|
| WARNING:
For continued protection against
risk of fire, replace only with same type rating of fuse. |
|
DIMENSIONS
|
 |
|
|
|
|
