EDCO: Telecom/Datacom Products: FAS-TEL & FAS-31XT

Network Power Divisions

FAS-TEL

Printable Page

FAS-TEL and FAS-31XT
RJ11/RJ31X Telephone Protection

The FAS-TEL and FAS-31XT are single-pair telephone or data line protectors that implement advanced two-stage hybrid design. These units address overvoltage transients with silicon breakover devices, while sneak and fault currents are mitigated with PTC technology which consists of solid-state resettable fuses.

FAS-31XT replaces the RJ31X jack with a protected version. Four screw terminals are provided to wire the protector in the same manner as a standard RJ31X jack. The FAS-31XT can be used alone or as an accessory to the TS-500G or TS-500F AC Power Surge Protector. The TS-500G and TS-500F provide a convenient grounding point for the FAS-31XT/FAS-TEL ground wire.

The FAS-TEL is nearly identical to the FAS-31XT except without the shorting bars. Two screw terminals are provided to connect Telco Line to protector. Protected equipment such as modems are plugged into female modular jack on the FAS-TEL.

FEATURES

• ‹1 Nanosecond Response Time

• Solid-State Silicon Breakover
Technology

• Low Capacitance

• Overcurrent Protection

• UL 497A Listed

• Line-to-Line Protection

• Line-to-Ground Protection

• Polyswitch Resettable Fuses—PTCs

SPECIFICATIONS
Part #	Max Peak Signal Voltage	Nominal Breakdown Voltage	Max Current Ip 10 x 1000µs	Max Clamp Voltage @Ip	Typ Cap (pf)	Max Continuous Current	Nominal Series Resistance
FAS-TEL-015T	12	15	124	20	2100	150mA	8 Ohms
FAS-TEL-030T	24	30	71	38	1180	150mA	8 Ohms
FAS-TEL-050T	43	50	45	57	900	150mA	8 Ohms
FAS-TEL-060T	52	60	36	66	750	150mA	8 Ohms
FAS-TEL-200T	220	270	100A (T-G) + (R-G)	10*	50	150mA	8 Ohms
FAS-31XT	220	270	100A (T-G) + (R-G)	10*	50	150mA	8 Ohms
FAS-TEL-DSL	285	300	100A (T-G) + (R-G)	10*	50	150mA	8 Ohms
* NOTE: Forward Voltage After Breakover

INSTALLATION