SRS-232-25
|
 |
 SRS-232 Series
Protection for Computers or Peripherals
The SRS-232, utilizing silicon avalanche clamp devices, is a state-of-the-art surge protector for IEEE Standard RS-232C peripheral devices.
The SRS-232 simply plugs in series with the data cable at or very near the equipment to be protected. If very long cable runs or outdoor runs are present, then additional hybrid protectors at the building entry of the cable are recommended (see PC642 Series).
| SPECIFICATIONS |
| Max Operating Voltage |
±20 Volts |
| Typ Leakage Current |
5µ Amps |
| Max Data Rate |
150kb |
| Operating Temperature |
0° to +85°C |
| Max Surge Current (10 x 1000µs) |
43 Amps |
| Max Clamp Voltage |
35 Volts |
| Max Transient Voltage |
6kV |
| Clamp Response Time |
‹1 nanosecond |
| UL 497B Listed |
|
|
| ORDERING INFORMATION |
| Interface with 25-pin connectors |
SRS-232-25 (Protects Pins 2–8 and 20) |
| Interface with 9-pin connectors |
SRS-232-9 (Protects all pins) |
NOTE: Pin 1 on SRS-232-25 is chassis ground. Ground wire must connect to
Building Approved Ground. Make ground wire as short and straight as possible.
|
 |
|
|
|
