|
 ACP-340LED
120VAC / 1 Phase / Filtered with LED
The ACP-340LED is an upgrade to the popular ACP-340, adding
an LED for failure indication and much better lightning protection
than the standard ACP-340.
The ACP-340LED
utilizes Thermally protected Metal Oxide Varistors (TMOV?s)
with an integrated thermally activated element designed to open in
the event of overheating due to the abnormal overvoltage, limited
current conditions.
The ACP-340LED
filtering surge protector absorbs power line noise and switching
transients that other suppressors and RFI filters pass
through. The ACP-340LED can replace the RFI filter when
high attenuation of noise above 25 Mhz is not required.
| CAUTION |
| 1. |
This product could become excessively hot and rupture
in the rare event of power line conditions or surge
that exceeds its rated operating specification. Appropriate
precautions should be exercised.
|
| 2. |
High voltages are present on
electrical termination. Unit should be serviced by qualified
personnel only. |
|
|
| SPECIFICATIONS |
| Operating
Voltage |
120 VAC
|
| Clamping
Voltage |
395 VAC
|
| Operating
Current |
15A
|
|
Peak Surge Current |
100kA / Phase, 50 kA / Mode
|
| Total
Peak Surge Current |
150 kA
|
| Operating
Frequency |
47-63 Hz
|
| EMI
Attenuation |
40 dB typ
|
| SPD
Technology |
MOV's w/L-C Filter
|
| Modes
of Protection |
L-N, L-G, N-G
|
| Status
Indication |
Power On & MOV's
Functional
|
| Connection
Type |
1/4-20 Stainless Steel Stud
|
| Operating Temperature |
–40°C to +85°C
|
| Dimensions
(Inches) |
1.875H x 3.25W x 5.75L
|
| Weight |
1 lb 2 oz
|
|
|
|
INSTALLATION |
|
|
| MOUNTING |
|
|
| |
|
