Printable Page
|
 |
 ACP-340
120VAC / 1 Phase / Filtered
The ACP-340 filtering surge protector
absorbs power line noise and switching transients that other suppressors
and RFI filters pass through. In addition, this unit offers better
lightning protection than the standard SHP300-10. The ACP-340
can replace the RFI filter when high attenuation of noise above 25
MHz is not required.
If random time-base, memory loss, or other problems are affecting
some of your intersections, this state-of-the-art protector can
be of great benefit when properly installed.
| CAUTION |
| 1. |
This product could become excessively hot and rupture
in the rare event of power line conditions or surge
that exceeds its rated operating specification. Appropriate
precautions should be exercised.
|
| 2. |
High voltages are present on
electrical termination. Unit should be serviced by qualified
personnel only. |
|
|
| SPECIFICATIONS |
| Operating
Voltage |
120 VAC
|
| Clamping
Voltage |
395 VAC
|
| Operating
Current |
10A
|
| Total
Peak Surge Current |
58 kA
|
| Operating
Frequency |
47-63 Hz
|
| EMI
Attenuation |
40 dB typ
|
| SPD
Technology |
MOV's w/L-C Filter
|
| Modes
of Protection |
L-N, L-G, N-G
|
| Status
Indication |
NA
|
| Connection
Type |
1/4-20 Stainless Steel Stud
|
| Operating Temperature |
–40°C to +85°C
|
| Dimensions
(Inches) |
7.125L x 3.125W x 2.25H
|
| Weight |
1 lb 13.5 oz
|
| Certifications |
ISO 9001:2000
|
|
|
|
INSTALLATION |
|
|
| MOUNTING |
|
|
| |
|
|
