Printable Page
|
 |
 SHA-1210
120VAC / 1 Phase / Filtered
The SHA-1210 filtering surge protector
absorbs power line noise and switching transients that other suppressors
and RFI filters pass through. The SHA-1210
can replace the RFI filter when high attenuation of noise above 25
MHz is not required.
If random time-base, memory loss, or other problems are affecting
some of your intersections, this state-of-the-art protector can
be of great benefit when properly installed.
The unique configuration of the SHA-1210 circuitry allows the
option to turn off the filtered power to the controller without
shutting down the main power to the cabinet.
| CAUTION |
| 1. |
This product could become excessively hot and rupture
in the rare event of power line conditions or surge
that exceeds its rated operating specification. Appropriate
precautions should be exercised.
|
| 2. |
High voltages are present on
electrical termination. Unit should be serviced by qualified
personnel only. |
|
|
| SPECIFICATIONS |
| Operating Voltage |
120 VAC |
| Clamping
Voltage |
395
VAC |
| Operating Current |
10A |
| Total Peak
Surge Current |
78kA |
| Operating Frequency |
47-63
Hz |
| EMI
Attenuation |
60dB
typ |
| SPD Technology |
MOV's
w/L-C Filter |
| Modes of
Protection |
L-N,
L-G, N-G |
| Status Indication |
NA |
| Connection
Type |
1/4-20
Stainless Steel Stud |
| Operating Temperature |
–40°C
to +85°C |
| Dimensions
(Inches) |
2.375H
x 3.125W x 7.125L |
| Weight |
2
lbs |
| Certifications |
ISO
9001:2000 |
|
|
| INSTALLATION |
 |
|
|
|
MOUNTING
|
|
|
